
Eurotech Single Turret / Dual Spindle Series
Single Turret / Dual Spindle

Eurotech TA 15YS
Specifications
Main Spindle / Sub-Spindle Chuck Size: 6” / 6”
Bar Capacity: 2.05”
Main/Sub Spindle Speed: 4,500 RPM / 4,500 RPM
Main / Sub-Spindle Motor: 19 HP / 18.8 HP
Swing over Bed: 29.92””
Max Turning Length: 25.2”
Live Tool: 12,000 RPM / 15.5 HP
Features
• Sub-Spindle / Single Turret with Y-Axis (4.73” Y-Axis Stroke) with a 19 HP Main Spindle Motor
• All Direct Drive. No belts used in spindles, turret, axis motors and encoders. NO LAG
• 12,000 RPM / 15.5 HP Live Tooling
• 12 Station or 15 Station Turret
• 1G Acceleration
• 70% Heavier (Machine weight: 16,280 lbs.) than the competitors
• Wide Box Ways on all axes to include the Y-axis. Heated and ground to tolerances.
• Laser compensation on all axes during construction. Including C-Axis
• TA Series Sub-Spindle torque of 292 Nm vs. approx. 50Nm on competitors
• Eurotech’s Famous Gap Elimination Ladder which saves at least 20% in your cycle time

Eurotech TA 20YS
Specifications
Main Spindle / Sub-Spindle Chuck Size: 8” / 6”
Bar Capacity: 2.6”
Main/Sub Spindle Speed: 4,000 RPM / 4,500 RPM
Main / Sub-Spindle Motor: 30 HP / 18.8 HP
Swing over Bed: 29.92””
Max Turning Length: 25.2”
Live Tool: 12,000 RPM / 15.5 HP
Features
• Sub-Spindle / Single Turret with Y-Axis (4.73” Y-Axis Stroke) and a 30 HP Main Spindle Motor
• All Direct Drive. No belts used in spindles, turret, axis motors and encoders. NO LAG
• 12,000 RPM / 15.5 HP Live Tooling
• 12 Station or 15 Station Turret
• 1G Acceleration
• 70% Heavier (Machine weight: 16,280 lbs.) than the competitors
• Wide Box Ways on all axes to include the Y-axis. Heated and ground to tolerances.
• Laser compensation on all axes during construction. Including C-Axis
• TA Series Sub-Spindle torque of 292 Nm vs. approx. 50Nm on competitors
• Eurotech’s Famous Gap Elimination Ladder which saves at least 20% in your cycle time

Eurotech TA 25YS
Specifications
Main Spindle / Sub-Spindle Chuck Size: 10” / 8”
Bar Capacity: 2.6”
Main/Sub Spindle Speed: 4,000 RPM / 4,500 RPM
Main / Sub-Spindle Motor: 47 HP / 18.8 HP
Swing over Bed: 29.92””
Max Turning Length: 25.2”
Live Tool: 12,000 RPM / 15.5 HP
Features
• Sub-Spindle / Single Turret with Y-Axis (4.73” Y-Axis Stroke) and a 47 HP Main Spindle Motor
• All Direct Drive. No belts used in spindles, turret, axis motors and encoders. NO LAG
• 12,000 RPM / 15.5 HP Live Tooling
• 12 Station or 15 Station Turret
• 1G Acceleration
• 70% Heavier (Machine weight: 16,280 lbs.) than the competitors
• Wide Box Ways on all axes to include the Y-axis. Heated and ground to tolerances.
• Laser compensation on all axes during construction. Including C-Axis
• TA Series Sub-Spindle torque of 292 Nm vs. approx. 50Nm on competitors
• Eurotech’s Famous Gap Elimination Ladder which saves at least 20% in your cycle time

Eurotech TA 30YS
Specifications
Main Spindle / Sub-Spindle Chuck Size: 12” / 8”
Bar Capacity: 3.23”
Main/Sub Spindle Speed: 3,500 RPM / 4,500 RPM
Main / Sub-Spindle Motor: 56 HP / 18.8 HP
Swing over Bed: 29.92””
Max Turning Length: 25.2”
Live Tool: 12,000 RPM / 15.5 HP
Features
• Sub-Spindle / Single Turret with Y-Axis (4.73” Y-Axis Stroke) and a 56 HP Main Spindle Motor
• All Direct Drive. No belts used in spindles, turret, axis motors and encoders. NO LAG
• 12,000 RPM / 15.5 HP Live Tooling
• 12 Station or 15 Station Turret
• 1G Acceleration
• 70% Heavier (Machine weight: 16,280 lbs.) than the competitors
• Wide Box Ways on all axes to include the Y-axis. Heated and ground to tolerances.
• Laser compensation on all axes during construction. Including C-Axis
• TA Series Sub-Spindle torque of 292 Nm vs. approx. 50Nm on competitors
• Eurotech’s Famous Gap Elimination Ladder which saves at least 20% in your cycle time