4 Lancaster Pkwy | Lancaster, NY 14086    //    (716) 684-4100    //    sales@glmincny.com

Showroom Machines

50 Taper

SMEC LCV 6700

Specifications

Travels (X/Y/Z): 53.15” x 26.38” x 25.59”
Spindle Speed: 6,000 RPM / 2-Speed Gear
Tools: 30 Tools
Taper: 50 Taper / Big Plus
Table Size: 61.02” x 25.59”
Way Construction: Box Way

Features

Fine grain one-piece Meehanite® cast iron bed
Rigid triangular rib body structure for minimizing vibration and deformation under heavy machining
Anti-heat displacement spindle and headstock design
Ultra precision and high rigidity spindle bearings
Wide induction hardened box ways
High precision pre-tensioned large diameter ball screws for all axes
Easy chip removal through built-in (internal) screw conveyor
Powerful and reliable Fanuc motors and drives system
Automatic lubrication through metered piston distribution

Single Turret / Dual Spindle

Eurotech TA 30YS

Specifications

Main Spindle / Sub-Spindle Chuck Size: 12” / 8”
Bar Capacity: 3.23”
Main/Sub Spindle Speed: 3,500 RPM / 4,500 RPM
Main / Sub-Spindle Motor: 56 HP / 18.8 HP
Swing over Bed: 29.92””
Max Turning Length: 25.2”
Live Tool: 12,000 RPM / 15.5 HP

Features

Sub-Spindle / Single Turret with Y-Axis (4.73” Y-Axis Stroke) and a 56 HP Main Spindle Motor
All Direct Drive. No belts used in spindles, turret, axis motors and encoders. NO LAG
12,000 RPM / 15.5 HP Live Tooling
12 Station or 15 Station Turret
1G Acceleration
70% Heavier (Machine weight: 16,280 lbs.) than the competitors
Wide Box Ways on all axes to include the Y-axis. Heated and ground to tolerances.
Laser compensation on all axes during construction. Including C-Axis
TA Series Sub-Spindle torque of 292 Nm vs. approx. 50Nm on competitors
Eurotech’s Famous Gap Elimination Ladder which saves at least 20% in your cycle time

Twin Turret / Twin Spindle

Eurotech TTL-66 Volar

Specifications

Bar Capacity: 2.6”
Main/Sub Spindle Speed: 4,000 RPM / 4,000 RPM
Main / Sub-Spindle Motor: 47 HP / 47 HP
Live Tooling: 12,000 RPM / 18.8 HP

Super-Imposed Sub-Spindle

The sub-spindle featuring a double movement (longitudinal and transversal – Z3 and X3 Axes) enables reliable and flexible machining operations.

The Sub-Spindle can offset from the main spindle
Elimination of interference problems between two turrets
Simultaneous “follow up” machining using three tools thanks to the “Superimposition” function
Possibility to use the sub-spindle as a regular tailstock to hold the component machined on the main spindle with T1 and simultaneously perform finishing with T2

Features

47 HP Integrated Main and Sub-Spindle
0-4,000 RPM in 1.9 seconds vs. 3.9 seconds of the competition
No Belts. All Direct Drive
Chillers on the Spindle Motors, Ballscrews and Turret Housing

Twin Turret / Twin Spindle

Eurotech BMX-45 Y2 Rapido

The Fastest and Most Capable Turning Center on the Market

Specifications

Bar Capacity: 1.773” (45mm)
Main/Sub Spindle Speed: 6,000 RPM / 6,000 RPM
Main / Sub-Spindle Motor: 15 HP / 15 HP

Super-Imposed Sub-Spindle

The sub-spindle featuring a double movement (longitudinal and transversal – Z3 and X3 Axes) enables reliable and flexible machining operations.

 The Sub-Spindle can offset from the main spindle
 Elimination of interference problems between two turrets
 Simultaneous “follow up” machining using three tools thanks to the “Superimposition” function
 Possibility to use the sub-spindle as a regular tailstock to hold the component machined on the main spindle with T1 and simultaneously perform finishing with T2

Features

 Programmable Automatic Parts-Catcher and Conveyor
SSS Control “Super Smooth Surface” for determining appropriate shapes and avoiding unnecessary decelerations
 OMR Control (High Speed and Accuracy Control of driving system by estimating paths of machine-end)
 Tool Wear and Breakage Monitoring System

Vertical 5-Axis Machining Centers

Kitamura MedCenter 5AX

Specifications

Table Size: 6.7” Diameter
Travels: 10” x 13” x 13”
A-Axis: -120 ~ +120 degrees
Spindle Speed: 30,000 RPM / HSK-E40
Tools: 40 Tools (120 Option)
Rapids (X/Y/Z): 2,362 IPM (X/Y) / 1,969 (Z)

Features

Ideal for ultra-high precision simultaneous 5-axis machining of small medical parts, micro machining
Positioning Accuracy: ±0.000079” Full Stroke, Repeatability: ±0.000039”
Compact design fits within a 4′ x 7′ footprint
Powerful high speed 30,000rpm HSK-E40 25HP Direct Drive Spindle
40 tool, fixed pot ATC with maximum tool weight of 4.4Lbs
High accuracy package – Linear & rotary scales, 67 million pulse encoder technology, 16mm pitch ballscrews
Optional 12-station APC available (11″ x 11″ (280 x 280mm) table)